New Aluminum Billet Oil
Fill and Oil Filter Caps for BMK21 By-Pass Filtration
System
 AMSOIL
now offers new by-pass components to ease the installation
of the BMK21 By-Pass Filtration System in three popular
diesel engines: the Ford 6.0L Power Stroke™,
the Dodge 5.9L Cummins and the General Motors 6.6L
Duramax.
Engine compartments are
becoming increasingly cramped, leaving little room
for after-market additions and improvements. The BMK21
is a single remote by-pass filter system that fits
into much smaller spaces than the AMSOIL Dual-Remote
By-Pass System.
Ford 6.0L Power
Stroke™ Diesels
To ease installation of the BMK21 on 2003 and later model Ford pickups equipped
with the 6.0L Power Stroke™ diesel engine, AMSOIL provides the new Aluminum
Billet Oil Filter Cap (BK1101), the Aluminum Billet Oil Fill Cap (BK1102) and
the 90-degree JIC Elbow (BP242). These new high-quality billet aluminum caps
replace the original equipment manufacturer (OEM) filter cap and oil fill cap.
The new caps have holes tapped in them that accept the JIC elbows for hose
connectors.
Dodge 5.9L Cummins
Diesels
To ease installation of the BMK21 in 2004 and later model Dodge pickups equipped
with the 5.9L Cummins diesel engine, AMSOIL offers the new 1/8" NPT -
1/4" JIC fitting (BP241), the Aluminum Billet Oil Fill Cap for Dodge 5.9L
Cummins diesels (BK1301) and the 90-degree JIC Elbow (BP242). The BP241 fits
onto the existing plug on top of the OEM full-flow filter mount, and the addition
of the BK1301 eases the installation of the oil return line.
General Motors
6.6L Duramax Diesels
To provide GM Duramax owners the same ease of installing the BMK21, AMSOIL
is now offering an oil filter “Sandwich” adapter (BK1201).
The Sandwich adapter is an anodized
billet aluminum adapter that screws on to the present
full flow oil filter nipple located on the engine block.
The full flow filter is then simply spun on to the
adapter. The Sandwich adapter has an orifice to provide
high-pressure oil feed for the BMK21. Like the other
diesel applications, AMSOIL now offers an Aluminum
Billet Oil Filler Cap for (BK1202) to ease the installation
of the oil flow from the BMK21 back to the engine.
To complete an installation, the following components
must be purchased separately:
- Aluminum oil filter Sandwich
Adapter with o-ring (BK1201)
- Aluminum Billet Oil Filler Cap for GM Duramax (BK1202)
- Two 90 degree JIC Elbows (BP242)
- Single Remote By-pass system (BMK11)
- By-pass filter (EaBP90, EaBP100, or EaBP110, as space dictates)
Higher Efficiency
AMSOIL EaBP Filters have an efficiency of 98.7 percent at two
microns. At normal operating RPMs the EaBP Filter will filter all of
the oil in a typical five quart sump in less than 10 minutes.
Superior Construction
The superior construction of AMSOIL EaBP Filters provides better sealing
and increased longevity along with superior corrosion resistance.
AMSOIL EaBP Filters have a marine powder coated exterior; and
their zinc-dichromate base plates increase rust protection. EaBP
Filters have a nitrile HNBR gasket and an orange silicone anti-drain
valve. The two stage pleated and layered cellulose/full synthetic
media has an efficiency rating of 98.7 percent at two microns.
Longer Lasting
When used in conjunction with AMSOIL motor oil and an AMSOIL EaO
or Donaldson Endurance™ filter, the EaBP should be changed every
other full-flow filter change up to 60,000 miles. When used with
other brands of motor oil or full-flow filters, the EaBP Filter should
be changed every other full-flow filter change. AMSOIL recommends
using oil analysis when extending oil drain intervals.
Increased Oil Capacity
The increased fluid system capacity and filtration
life provides improved oil cooling and ensures that
equipment constantly runs on clean oil. Engine efficiency
is increased, providing extended engine life.
Soot Removal
AMSOIL has designed a new high-efficiency
by-pass filter element that is also a soot removal
device. AMSOIL Ea By-Pass Filters use a synthetic/cellulose sandwiched media. The inner
layer of the element is composed of a highly efficient
cellulose media covered with a full synthetic
media outer layer. These filters remove 39 percent
of soot contaminants less than one micron.
Soot removal efficiency increases approximately
10 to 14 percent when the EaBP Filter is used in conjunction with a standard full-flow filter.
By-Pass Filtration Benefits
- Dramatically Extended Drain Intervals
- Improved Oil Cooling
- Increased Filtration Capacity and Life
- Increased Fluid System Capacity
- Efficient Small Particle and Soot Removal
- Significantly Extended Engine Life
- Equipment Constantly Runs on Clean Oil
- Increased Engine Efficiency
- Remove Particles Less Than One Micro
Dual Remote Filter System
The AMSOIL Dual Remote Oil Filtration System
converts an engine’s full-flow oil filter system into
a full-flow/by-pass oil filtration system by attaching
an AMSOIL Full-Flow Oil Filter and AMSOIL
Spin-On By-Pass Oil Filter onto a remote mount.
The Dual Remote System provides superior filtration efficiency, increased oil capacity and
improved oil filtration accessibility. See the G1092 brochure for more info on the Dual Remote Filtration System.
Typical Installation Diagram for BMK23, BMK25, BMK26 and BMK27 Kits.
See
the By-Pass Replacement Parts Lists
|
